FlyShare allows you to transfer files from the DJI RC/DJI RC 2 remote controller to a mobile device.

To use FlyShare on DJI RC, it is necessary to update the relevant firmware：

DJI RC:  V01.02.0000 or above;

DJI RC 2: V02.01.0048 or above;

DJI Fly: V1.13.0 or above.

 

Applicable products: 

DJI RC: DJI Mini 3 Pro, DJI Mavic 3 series, DJI Air 2S supports Flyshare;

DJI RC 2: DJI Air 3S, DJI Neo, DJI Mini 4 Pro, DJI Air 3 supports Flyshare;

* DJI RC Pro does not support FlyShare.

 

Operation Guide

DJI RC/DJI RC 2 Instructions

Go to Album on DJI RC, and tap the “FlyShare” icon on the bottom right corner, and a QR code will appear on the interface. Scan to view the FlyShare connection guide.

 

Mobile Device Instructions

Launch DJI Fly on your mobile device, enter the Album, and tap the “QuickTransfer” icon at the upper right corner.

Tap the “Scan Code” icon in the lower right corner of the prompt box, and scan the QR code on DJI RC. When it prompts that the connection is successful, enter the album of DJI RC.

Select the photos or videos to be exported, and tap “Download” in the upper right corner to download the footage to the mobile device.

 

FAQ

1. What is the difference between FlyShare and QuickTransfer?

QuickTransfer is used to transfer files from a drone to a mobile device, while FlyShare to transfer files from DJI RC/DJI RC 2 to a mobile device.    

 

2. I failed to scan the QR code. What should I do?

If you still fail to scan the QR code after multiple tries, please go to the phone system settings to manually connect the phone to DJI RC via Wi-Fi.

 

3.  Can I use FlyShare in midflight?

No. The image transmission signals and Wi-Fi transmission signals may interfere with each other during flight, which thereby limits the use of FlyShare.

 

4. How do I transfer and download footage via FlyShare when using DJI Air 2S with DJI RC?

Method 1: Download the footage from DJI Air 2S to DJI RC, and then transfer it to DJI Fly using the FlyShare function.

Method 2: Remove the microSD card from the drone, insert it into DJI RC, and transfer the materials in the card to DJI Fly using the FlyShare function.

💡[Tips] If a microSD card is already inserted into the DJI RC, pull it out first and store it properly. After inserting the microSD card into DJI RC, tap Album > Saved, and select the desired folder.

It is recommended to use method 2, which is more efficient and convenient.

 

5. Can FlyShare be refreshed to update materials?

No. To update the materials, exit FlyShare and then scan the QR code to try again.